After testing our last DIAero P-03 prototype gravel frame for a little over half a year, we decided that for the upcoming Cyclocross season we would be better served by developing our own take on a race-specific CX frame.
Tag: framebuilding
HTP-01 MTB Frame Ride Review
...this bike approaches turns with relish, simply itching to be carved hard around off-cambers and thrown head-long into steep trails where most XC bikes would have no purpose being.
DIAero P-01 Gravel Frame Ride Review
We chose to build our first prototype with very aggressive geometry in order to test the extreme of what we think the geometry of a DIAero bike should be.
The Albatross Process
Every Albatross frame that is built goes through a series of steps that we have developed to ensure that every customer is pleased with their finished frame. To better help you understand the care that goes into every frame, we've laid out our process below. Design Every bike we create starts with a series … Continue reading The Albatross Process
By Hand or By Machine
The quality of a fillet or a weld is often directly related to the quality of the prep work. For tube-to-tube construction as used in bicycle construction, this means the cleanliness of the tubes, whether or not you have drilled your vent holes, and of course, the mitering. A close miter is a thing of … Continue reading By Hand or By Machine
A Lathe at the Center of Every Shop
In the small shop that I work in, the lathe is the center piece.
